|
|
|
UF_PARAM_set_int_value的用法
(这条文章已经被阅读了 2937 次) 时间：2009/06/06/07:54
来源：even2004
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <uf.h>
#include <uf_ui.h>
#include <uf_disp.h>
#include <uf_object_types.h>
#include <uf_obj.h>
#include <uf_modl.h>
#include <uf_curve.h>
#include <uf_assem.h>
#include <uf_ui_ont.h>
#include <uf_ui_param.h>
#include <uf_oper.h>
#include <uf_cam.h>
#include <uf_cam_errors.h>
#include <uf_param.h>
#include <uf_param_indices.h>
#define UF_CALL(X) (report_error( __FILE__, __LINE__, #X, (X)))
static int report_error( char *file, int line, char *call, int irc)
{
if (irc)
{
char err[133],
msg[133];
sprintf(msg, "*** ERROR code %d at line %d in %s:n+++ ",
irc, line, file);
UF_get_fail_message(irc, err);
'
/* NOTE: UF_print_syslog is new in V18 */
UF_print_syslog(msg, FALSE);
UF_print_syslog(err, FALSE);
UF_print_syslog("n", FALSE);
UF_print_syslog(call, FALSE);
UF_print_syslog(";n", FALSE);
if (!UF_UI_open_listing_window())
{
UF_UI_write_listing_window(msg);
UF_UI_write_listing_window(err);
UF_UI_write_listing_window("n");
UF_UI_write_listing_window(call);
UF_UI_write_listing_window(";n");
}
}
return(irc);
}
#define WRITE_S(X) (write_string_to_listing_window(X))
void write_string_to_listing_window( char *string)
{
char
msg[MAX_LINE_SIZE+1];
UF_CALL(UF_UI_open_listing_window());
sprintf(msg, "%sn", string);
UF_CALL(UF_UI_write_listing_window(msg));
}
static logical specify_point(char *prompt, double loc[3])
{
int
ia2[2] = { 0,0 },
ip3 = 0,
irc;
irc = uc1616(prompt, ia2, ip3, loc);
if (irc == 5) return TRUE;
else return FALSE;
}
static void do_it(void)-
{/
tag_t *objects;
tag_t point;
int i,
entity_count,)
object_count, err_code, type, subtype,response,
TRIM_POINT1_TOG_AUTOMATIC = 0,
TRIM_POINT1_TOG_VECTOR = 1,
TRIM_POINT1_TOG_ANGLE = 2,
togle_off = 0,
togle_on = 1;
double ang_val_radians = 1.57; // 90 degress
double pos[3];
char msg[MAX_LINE_SIZE+1];
char errorstrg[133];
logical is_initialized;
logical is_generated;
if (UF_CALL(UF_CAM_is_session_initialized(&is_initialized)) || (is_initialized == FALSE))return;
while (specify_point("Indicate point location", pos))
UF_CALL(UF_CURVE_create_point(pos, &point));
/* Get the highlighted/selected objects from Navigation Tool. */
UF_UI_ONT_ask_selected_nodes( &object_count, &objects );
if (object_count > 0)
{
UF_CALL( UF_OBJ_ask_type_and_subtype (objects[0],&type,&subtype));
sprintf(msg,"type is %d subtype is %d",type,subtype);
WRITE_S(msg);
if (type == UF_machining_operation_type && subtype == UF_mach_turn_rough_subtype )
{
UF_CALL(UF_PARAM_set_int_value(objects[0],UF_PARAM_TURN_TRIM_POINT1_TOG,togle_on));
UF_CALL(UF_PARAM_set_tag_value(objects[0],UF_PARAM_TURN_TRIM_POINT1_TAG,point));
UF_CALL(UF_PARAM_set_int_value(objects[0],UF_PARAM_TURN_TRIM_POINT1_ANGLE_TOG,TRIM_POINT1_TOG_ANGLE));
UF_CALL(UF_PARAM_set_double_value(objects[0],UF_PARAM_TURN_TRIM_POINT1_ANGLE_VAL,ang_val_radians));
UF_CALL(UF_PARAM_generate(objects[0],&is_generated));
}
else
{
sprintf(msg,"object type is not UF_machining_operation_type and subtype is not UF_mach_turn_rough_subtype");
WRITE_S(msg);
}
UF_free(objects);
}
else
{
UF_CALL(UF_UI_open_listing_window( ));
sprintf(msg,"objects selected in ONT is not equal to 1");
UF_CALL(UF_UI_write_listing_window(msg));
}
return;
}
extern DllExport void ufusr( char *parm, int *returnCode, int rlen )
{
/* Initialize the API environment */
if( UF_CALL(UF_initialize()) )
{
/* Failed to initialize */
return;
}
do_it();
/* Terminate the API environment */
UF_CALL(UF_terminate());
}
extern int ufusr_ask_unload( void )
{
return( UF_UNLOAD_IMMEDIATELY );
|
|
阳光精品论坛 >> 『 CAD 专栏 』 >> UF_PARAM_set_int_value的用法